Mixing Flow Patterns & Impeller Types

Enduramaxx Mixing Flow Patterns & Impeller Types

Mixing Flow Patterns & Impeller Types

Mixing Flow Patterns & Impeller Types, in our article on the Importance of impeller selection, we provided an overview of the common types of impellers used in industrial mixing.  We’ll go into more detail about each impeller type and their influences on the mixing process.

We focus on impellers because they are the part of the mixer that does the actual mixing as they rotate they create fluid flow.  These flow patterns are the primary consideration when designing a mixer because creating the right flow pattern is critical to achieving the desired result.  The most common flow patterns in mixing are axial (down and up) and radial (side to side) flows.  These flow patterns describe the generic classes of impellers: axial and radial.

Axial (down and up) pumping is an important flow pattern because it addresses two of the most common challenges in mixing; solid suspension and stratification. In this process, superficial and annular velocities can be calculated to determine and control the level of mixing. (If your axial impeller is causing swirling or vortexing, please refer to our reference to How mixer baffles can improve your mixing process.

Here are some of the most common axial impellers;

A. Marine-type Propellers Commonly used on marine boats, the propellers are often used in small portable direct drive mixer applications as they’re economical and efficient. In larger applications, they’re seldom used because of their price and weight.

B. Pitch The pitch blade impeller is the most versatile impeller and was the standard until the development of the airfoil. They’re useful in blending two or more liquids and are effective in low bottom clearance with less liquid submergence.

C. Hydrofoils The camber of the blade increases the efficiency of the impeller, reducing its power/pumping ratio. A more technical benefit is the laminar flow created by the camber of this impeller. This camber reduces turbulence (shear) substantially. That is why it is selected for shear-sensitive applications as well

D. Radial Flow Impellers Unlike axial impellers, radial impellers are commonly selected for low-level mixing or elongated tanks. They typically give high shear rates and also have a relatively low pumping number making them the most sensitive to viscosity. Radial impellers do not have a high tank turnover flow like axial flow impellers.

Impeller Selection

As you can see, the first step to meeting your mixing objective is to identify your desired flow pattern, which is dictated by the impeller. Next, you must consider the 4 main factors for configuring your mixer.  Many more important mixer terms are available here.

Main Menu